It is made of Aluminum billet.
Brembo 84mm pitch use can use the caliper.
The billet torque rod made by aluminum is attached, too.
Processing is necessary for a normal swing arm available for only a swing arm made in us.
GPZ900R Rear caliper support
It is made of Aluminum billet.
Brembo 84mm pitch use can use the caliper.
The billet torque rod made by aluminum is attached, too.
Processing is necessary for a normal swing arm available for only a swing arm made in us.
CB1300SF '03-'08 / CB1300SB '06-'08
Rear caliper support
CB1300SF '03-'08
CB1300SB '06-'08
This is Rear caliper support, made of Aluminum billet.
It is possible to use with new Brembo Caliper, 34φx2 piston
（Parts number：120A44110).
It is possible to use with normal Swing arm or K-FACTORY Swing arm.
※Conventional Brembo Caliper (trapezoid type) interferes it.
※Original wheel can be used for Rear wheel, although the clearance
between a hub and Caliper is not enough.
When you use original wheel and it interferes, a processing at the
interference point will be required.
※It is possible to use original Brake master silynder.
※Normal brake horse cannot be used.
It is made of Aluminum billet.
Brembo 84mm pitch use can use the caliper.
The billet torque rod made by aluminum is attached, too.
Processing is necessary for a normal swing arm available for only a swing arm made in us.
It is a support for installation of Radial caliper.
Caliper installation pitch is 108mm so that it is possible to use for Brembo items(※1)and for other items of 108mm pitch(※2). Position ring of radial mount part is attached.
※ 1
Brembo Cliper (Model number：220.A016.10) can be installed with our Conversion collar bolt for Brembo Caliperφ310（Price￥12,600).
※ 2
TOKIKO genuine Caliper for SUZUKI GSX1300R can be bolted on. Genuine Caliper for CBR1000RR‘04-‘07 can be installed with our Conversion collar bolt for Brembo Caliper φ310（Price￥12,600）.
It is possible to use it for YZF-R104-06 genuine Caliper by changing genuine knock pin to attached position ring.
Genuine Caliper for GSX-R1000 ’04、ZX-10R ’04 can be used with 9.5mm collar bolt.
note）Size of the collar bolt is measured when normal φ310ｍｍ rotor is used.
※This item has to be installed properly, or it will be very dangerous.
It has to be installed by the professional.
GPZ900R Front radial caliper support
It is made of Aluminum billet.
It is a support for installation of Radial caliper. Caliper installation pitch is 108mm so that it is possible to use for Brembo items(※1)and for other items of 108mm pitch(※2). Position ring of radial mount part is attached.
※ 1
Brembo Caliper(Model number：220.A016.10) can be used with 9.5mm collar bolt.
Brembo racing Caliper(Model number：X97378*,97376*) can be used with 11mm collar bolt.
※ 2
TOKIKO genuine Caliper for CBR1000RR‘04-‘07 can be used with 9.5mm collar bolt.
note1）There are some models which cannot use it with genuine Radial caliper.
GSX1300R‘08 HAYABUSA cannot use it.
note2）Size of the collar bolt is measured when normal φ310ｍｍ rotor is used.
