K-FACTORY ON LINE SHOP

Webike

Goods list of NINJA250 '13-'16

2 3 Next>  
zoom
zoom

FRC チタン スリップオン 1本出し

<パイプ仕様>
テールパイプ材質:ステンレス
仕上げ:スターティングシルバー

<サイレンサー仕様>
サイレンサー筒材質:チタン
仕上げ:スターティングブルー SBL-B
外径:100、内径:42、長さ:400
テールエンド:カール

<マフラー仕様>
オイルエレメント ○
タンデムステップ ○
ノーマルステップ ○
アンダーカウル ○
オイル交換 ○
重量:1.86kg
音量(db):

JPY 57,500

▲page TOP

zoom
zoom
zoom
zoom

ライディングステップ

SuperBlack
JPY 45,000
MetaricSilver
JPY 45,000
StayGold
JPY 45,000

▲page TOP

zoom

Handlebar kit for RACE use

This is dedicated handlebar kit for NINJA250R.
Installation is simple, replacing it from normal handlebar.
It will be 25mm lower than normal position.
Also you can set a handle bar open angle in a range of 65mm.
K-FACTORY Front fork top cap can be used.

Handlebar:ODφ 22mm、Length 290mm
Handlebar angle from horizontal:5°lower than normal(25mm lower in height)
Handlebar angle from vertical:Adjustable in a range of 12.9°
Handlebar height:Adjustable in 2 height(25mm or 10mm lower than normal) with attached spacer.
Attachment:Duracon bar-end、Handlebar spacer
※K-FACTORY Handlebar lift up kit cannot be used with this model.

Handlebar is also sold as a repair parts.
Handlebar one side:¥3,675、Bar-end cap(Duracon)1pc.:¥1,260

JPY 24,000

▲page TOP

zoom

Secondary air cancel plate Coming soon

It cancel the secondary air supply system which is on the cylinder head cover.
It is aluminum billet with alumite processing.
It makes the adjusting easier because stopping secondary combustion makes a condition stable.
It is effective in an anti-after fire.

Metalic silver
JPY 6,500

▲page TOP

zoom
zoom

Sprocket K1 for RACE use

It is billet machined from a board of extra super duralumin.
It is lighter than genuine one and makes the weight under the spring lighter.
By reducing the weight by through cutting, it creates the racing atmosphere.
Furthermore, it has surface luster by roller burnishing process, and the surface hardening increases the strength of it.

Material:Aluminum(extra super duralumin)

※Without surface-treatment.

Fit model:
NINJA250R '08-'10、ZEPHYR400 '89-'95、ZEPHYR400χ '96-'08
GPZ500S '87-'03、ER500 '97-05、GPZ400R '85-'89
GPZ400S '86-'87、GPX400R '87-88、FX400R '85-'92
EX-4 '94-、ZZR250 '90-'07、KR250/S '84-'86
ELIMINATOR250 '86-'07、GPX250R/Ⅱ '87-'88、GPZ250R '85-'86

JPY 16,000
JPY 16,000
JPY 16,000
JPY 16,000
JPY 16,000

▲page TOP

zoom
zoom

Handlebar lift up kit

The handlebar height can be adjusted by the combination in three stages of 5・12・17mm up.
It is possible to use normal cables.

JPY 7,000

▲page TOP

zoom
zoom

Heat guard

Material:Titanium

for K-FACTORY NINJA250R Slip on muffler.
The material is Titanium and was given heat color processing.

JPY 12,000

▲page TOP

zoom
zoom

Top bridge

This part is cut from a block of the aluminum(A2017) with 3D machining, and is totally different finish from the standard parts.
Top bridge is always seen while you are riding motorcycle, so we were concerned with a design thoroughly, for example the slant part between handle clamp and fork clamp has a beautifull cut line.
It was reduced the weight by sharpening a useless part thoroughly and which makes handling well.
Billet stem bolt is also attached, and the design around the cockpit is changed completely cool.

JPY 35,000
JPY 35,000

▲page TOP

zoom

ハンドルバーキット用バーエンドキャップ

当社製ハンドルバーキット用の
ハンドルバーエンドです。

※価格は1個の価格です。

Black
JPY 1,200

▲page TOP

zoom

ハンドルバー&バーエンドセット

ハンドルバーキット用のリペアの
ハンドルバーとバーエンドのセットです。
(バーエンドは圧入済です。)
価格は、1本の価格です。

JPY 4,700

▲page TOP

2 3 Next>